Notice Board – Engineering Technology

The Final Examination of the Academic year, 2023/2024 will be conducted from 31th January 2025 to 20th March 2025. The time table(draft) can be downloaded from the link given below.

Please submit your observations/ feedback through the Google form given here on or before 17th December 2024

https://forms.gle/dFGpmm4fkjyT9j3F8

Final Awards of the Faculty Engineering Technology

• DEGREE OF BACHELOR OF SOFTWARE ENGINEERING – RC
• DEGREE OF MASTER OF SCIENCE IN STRUCTURAL ENGINEERING
• DEGREE OF BACHELOR OF TECHNOLOGY HONOURS IN ENGINEERING – RC
• DEGREE OF BACHELOR OF INDUSTRIAL STUDIES – IC
• POSTGRADUATE DIPLOMA IN TECHNOLOGY
• DEGREE OF BACHELOR OF SOFTWARE ENGINEERING – IC
• DEGREE OF BACHELOR OF TECHNOLOGY HONOURS IN ENGINEERING – IC
• DEGREE OF BACHELOR OF SCIENCE HONOURS IN ENGINEERING – IC
• DEGREE OF BACHELOR OF INDUSTRIAL STUDIES
• DEGREE OF BACHELOR OF SCIENCE HONOURS IN ENGINEERING – RC

Tentative Timetable
Final Exam Timetable 2023/2024 – 2nd Semester BSEHons and EEX3269, EEX4362 C EEX4366 in BScHons in Engineering

Re-scrutinization of Results of the Final Examination BSEHons Semester 1 2023/2024- Faculty of Engineering Technology

Students who sat for the Final Examination BSEHons Semester 1, 2023/2024 can apply for the re-correction of the results of the final examination on or before 19.12.2024.

1. Read the Notice – Click Here 
2. Application Form for Re-scrutinization of Examination Grades – Academic Year 2023/2024 – Click Here 

Students are also required to submit the via Google form given in this link –  https://forms.gle/oLJR7X6LhbFDHbMq6

Please note that you should submit the duly completed application form with an original paid receipt. Only students who have submitted a duly completed application form with an original paid receipt will be considered for re-correction of results. Please read the below conditions before submitting.

• – Payment per each course is Rs.500/- could be made to the OUSL Shroff counter or to the OUSL account – Peoples Bank, Nugegoda Branch, Account Number: 174-1002-8-0347378 (Receipts from CDM and online transactions will not be accepted)
• – Duly completed application form with an original paid receipt should be submitted to the Dean’s Office of the Faculty of Engineering Technology or by post to the following address

“Assistant Registrar,
Faculty of Engineering Technology,
The Open University of Sri Lanka, Nawala, Nugegoda”

• – Late/incorrect/incomplete applications will be rejected. Separate forms should be submitted for each subject.

Awareness Session plan for 2024 – BSc(ENG)/BIS/ACAT  Programmes

Awareness Session plan for 2024 – BSc(ENG)/BIS/ACAT  Programmes

FINAL “ADD DROP DATES” OF THE PROGRAMMES CONDUCTED BY THE FACULTY OF ENGINEERING TECHNOLOGY – ACADEMIC YEAR 2023/24

The final “ADD DROP” dates of the following programmes

i). Bachelor of Science in Engineering
ii). Bachelor of Industrial Studies
iii). Advanced Certificate in Apparel Technology

is scheduled as follows.

ADD Date – Friday, 18th October 2024 – Only Training Modules (Degree and Diploma) can be added.
DROP Date – Wednesday, 23rd October 2024 – Can drop the courses with the permission from the relevant Departments.

You can ADD and/or DROP from your registered centre and these ill be the last dates given for “ADD DROP” in the academic year 2023/24.

Registration Committee
Faculty of Engineering Technology
2023/24

BSE CAT #2 Examination from 26.10.2024 to 06.11.2024

Revised Continuous Assessment Test Time Table# 02 – 2023/2024 – [From 26th October till 6th November 2024]

Center Change to sit Continuous Assessment Tests (CAT#2) – Academic Year 2023/2024, OUSL [From 26th October onwards]

CAT # 2 Time Table from 26.10.2024 to 06.11.2024

Center Change to sit CAT 2 of Semester 2 of  BSE (Hons.), Academic Year 2023/2024, OUSL [From 19th October onwards]

CAT 2 Timetable for BSEHons 2023/2024 – Semester 2  – [From 19th October  till 22th October 2024] 

Call for Research Papers for ERU Gold Medal
Academic year 2022/2023

CAT01 of following courses are held in parallel with BSE Semester 02 CAT01.
Please check the relevant timetable.
EEX3269/EEI3269, EEX4362/EEI4362, EEX4366/EEI4366

Awareness Session – Bachelor of Software Engineering Honours Degree

27th September 2024 —-  7.00 pm onwards online

Zoom meeting link
https://learn.zoom.us/j/95882458332?pwd=eFo2wQvQqqFeYCZNyG61vKIOzY7c3b.1

Awareness Session – Bachelor of Software Engineering Honours Degree

27th September 2024 —-  7.00 pm onwards online

Zoom meeting link
https://learn.zoom.us/j/95882458332?pwd=eFo2wQvQqqFeYCZNyG61vKIOzY7c3b.1

CAT1 timetable of Semester 02 of BSEHons programme 2023/2024

Center Change to sit CAT 1 CAT 2 of Semester 2 of  BSE (Hons.), Academic Year 2023/2024, OUSL [From 26th September onwards]

Industrial Training Orientation Programme (NAITA Seminar) via Zoom Technology on 18th September 2024

Download

IMPORTANT NOTICE!

FDE3022 -Empowering for Independent Learning (EfIL) – 2023/24 2nd Cycle– Deadline Extended

The deadline for submitting the compulsory quizzes for cycle 2 has been extended until midnight 13 September 2024.

Academic Coordinator
09 September 2024

1. Dean’s List 2021-22  Click here

Applications for 2024/25

Applications for Bachelor of Software Engineering Honours (BSEHons) programme will be open from 1st September 2024.

Applications for
• Bachelor of Science Honours in Engineering [BSc Hons (Eng)]
• Bachelor of Industrial Studies Honours (BISHons)
• Advanced Certificate in Apparel Technology (ACAT)

programmes will be open from 5th September 2024.

IMPORTANT NOTICE! FDE3022 – Empowering for Independent Learning (EfIL) – 2023/24 – 2nd Cycle

FDE3022 Eligibility List 2023-24

Important Notice to students who have registered for Industrial Training Modules in view of applying to undergo training / releasing of Training  in the Academic year – 2023/2024 (*Google Form Submission*)

 Final Deadlines to Submit Daily Diaries, Reports(Training / Work Experience) and [FET/TRG/07] Forms to be considered for the Convocation 2024 and Award Ceremonies 2024/2025

 Activity Diary  (Coursewise)

 Attend CATs & OQs of Semester I of  BSE (Hons.), Academic Year 2023/2024, OUSL [From 04th May onwards]  from Overseas Countries- BSEHons, FET, OUSL, Academic Year 2023/2024

 Center Change to sit CATs & OQs of Semester I of  BSE (Hons.), Academic Year 2023/2024, OUSL [From 04th May onwards]

Students who wish to change their preferred Centers to sit for the  Final Exam BSE (Hons.) Semester I,   are requested to submit the application via below given Google form on or before 29th April 2024. Students are strictly advised to submit any request for center change only via this Google form before the given deadline. Any email request beyond this deadline will not be considered under any circumstances.

Note: OQ exams cannot be conducted in Ratnapura Center, So please select the next nearest center to Ratnapura.

 Bachelor of Software Engineering Degree Programme

Activity Schedule for the period 20th April to 26th April 2024

Activity Schedule for the period 14th April to 19th April 2024

Re-scrutinization of Results of the Final Examination 2022/23- Faculty of Engineering Technology

Students who sat for the Final Examination  2022/2023 for the undergraduate programmes –  BScHons (Eng) , BIS (Hons), and ACAT can apply for the re-correction of the results of the final examination. Duly filled application along with proof of payment (Rs.500/ per each course) should be sent on or before 22.04.2024 as per the instructions given in the Notice given below.

Students are also required to submit the same application via Google form given in this link –https://forms.gle/uszZ9vGyfw3bKfEt5

Download  Application Form for Verification of Examination Grades – Academic Year 2022/2023

Activity Schedule for the period 6th to 10th of April 2024

BACHELOR OF SOFTWARE ENGINEERING HONOURS, CAT & OQ 2023/2024 schedule

Industrial Training Orientation Programme (NAITA Seminar) via Zoom Technology on 13th March 2024

Open Discussion with Students

BACHELOR OF SOFTWARE ENGINEERING HONOURS

Outcome of the Re- Scrutinization of Final Examination Marks & Grades – BSEHons Semester 2 2022/2023  Click Here

Meeting to Discuss the Establishment of the Civil Engineering Society

Form to identify students’ concerns in completing academic programmes offered by the Faculty of Engineering Technology

FDE3020 – EfIL 2023-24 – Ice Breaker Session

Outcome of the Re- Scrutinization of Final Examination Marks & Grades – BSEHons Semester 1 2022/2023

Click Here

Final Examination Timetable

Re-scrutinization of Results of the Final Examination BSEHons Semester 2 2022/2023- Faculty of Engineering Technology

Students who sat for the Final Examination BSEHons Semester 2, 2022/2023 can apply for the re-correction of the results of the final examination on or before 19.01.2024.

1. Read the Notice Click here

2. Application Form for Verification of Examination Grades – Academic Year 2022/2023

Students are also required to submit the same application via Google form given in this link – https://forms.gle/VvPBsmgsUvpjbf3p8

Please note that you should submit a Duly completed application form with an original paid receipt. Only students who have submitted a Duly completed application form with an original paid receipt will be considered for re-correction of results. Please read the below conditions before submitting.

• – Payment per each course is Rs.500/- could be made to the OUSL Shroff counter or to the OUSL account – Peoples Bank, Nugegoda Branch, Account Number: 174-1002-8-0347378 (Receipts from CDM and online transactions will not be accepted)
• – Duly completed application form with an original paid receipt should be submitted to the Dean’s Office of the Faculty of Engineering Technology or by post to the following address

“Assistant Registrar,
Faculty of Engineering Technology,
The Open University of Sri Lanka, Nawala, Nugegoda”

• – Late/incorrect/incomplete applications will be rejected. Separate forms should be submitted for each subject.

Activity Schedule for EGAP and EfIL for the Academic Year 2023-24

• for EGAP Click here
• for EfIL Click Here

Attention for students who have not completed EGAP and EfIL (i.e. Repeat or not-registered)- Academic Year 2023/24

Students, who have not completed the English for General Academic Purposes (EGAP) Programme (i.e. Repeat or not-registered) in the BIS, BTech & BSE programmes, and/or Students, who have not completed the Empowering for Independent Learning (EfIL) programme (i.e. Repeat or not-registered) in the BIS & BTech programmes, please fill the relevant Google forms on or before 12th January 2024, 11.59pm.

1. for EGAP Programme :
2. for EfIL Programme :

Please note that you are requested to register for the EGAP during the re-registration for the Academic Year 2023/2024; The course codes are for BSE students- LTE3407 & for BTech & BIS Students -LTE3408.

The faculty plans to enroll you in the EGAP 2023/24 programme, to be commenced from 21st January 2024 and for the EfIL 2023/24 programme, to be commenced from 03rd February 2024. Further details will be provided as a notice on the faculty web page and via SMS.

If any clarifications, please contact:
Ms. Anjali, Academic Coordinator (EGAP & EfIL), Faculty of Engineering Technology
Email: dmpdi@ou.ac.lk

Calling of Applications for BScHons (Eng) and BIS Hons – Academic Year 2023/2024

Draft Final Examination Time Schedule 2022- 23 for students’ Feedback

 

 Meeting to introduce newly appointed Training Engineer to students of Departments of Mechanical Engineering and Electrical & Computer Engineering via Zoom Technology on 21st December 2023

Join Zoom Meeting : https://learn.zoom.us/j/94453728615?pwd=OG91U1dJRkVaOG9yN1NnYlZ3Zm5WZz09
Meeting ID : 944 5372 8615
Passcode : pP1x%50S

Awardees List

Degree of Master of Science in Structural Engineering
Degree of Bachelor of Technology Honours in Engineering (Ic)
Degree of Bachelor of Software Engineering (Ic)
Degree of Bachelor of Science Honours in Engineering (Ic)
Degree of Bachelor of Industrial Studies (Rc)-5
Degree of Bachelor of Industrial Studies (Ic)

Application Form for consideration for the award of the Bachelor of Science Honours in Engineering / Bachelor of Technology Honours in Engineering/Bachelor of Industrial Studies Honours /Bachelor of Software Engineering Honours Degrees in 2021/22

The application form available in the below link should be completed and returned by students who wish to have their overall results processed and considered for the award of the Bachelor of Science Honours in Engineering / Bachelor of Technology Honours in Engineering/Bachelor of Industrial Studies Honours /Bachelor of Software Engineering Honours Degrees in 2021/22 under the existing By-Laws for the award of the degrees.

Application (application download link should be given under this)

The duly completed application form should be handed over in person OR sent by Registered Post to reach the Assistant Registrar/Examinations, The Open University of Sri Lanka, Nawala, by 01st September 2023. Alternatively, you may submit your response to the Google form given below before the above deadline using your OUSL email address.

https://forms.gle/q1YoGCpKhXRqjfNu7 

Application form

Application Form for consideration for the Award of the Higher Diploma in Technology/ Higher Diploma in Industrial Studies/ Higher Diploma in Software Engineering 

The application form available in the below link should be completed and returned by students who wish to have their overall results processed and considered for the award of the Higher Diploma in Technology/ Higher Diploma in Industrial Studies/ Higher Diploma in Software Engineering in 2021/22 under the existing By-Laws for the award of the Higher Diploma.

Application

The duly completed application form should be handed over in person OR sent by Registered Post to reach the Assistant Registrar/Examinations, The Open University of Sri Lanka, Nawala, not later than 01^st September 2023. Alternatively, you may submit your response to the Google form given below before the above deadline using your OUSL email address.

https://forms.gle/vv7SFitTLFiRbUxD7

Application form

CAT II 2022/2023 for BSEHons and BTech courses EEX3269, EEX4362, EEX4366 

Industrial Training Orientation Programme (NAITA Seminar) via Zoom Technology on 28^th July 2023

Application for an additional attempt to sit the final examination of the relevant courses, to complete the degree under the Interim Curriculum, Academic Year 2022/2023

Condition 1

Condition 2

Concession for COVID or related health condition affected students granted to sit the final examination during 2021-22

Important Notice to students who have registered for Industrial Training Modules in view of applying to undergo training / releasing of Training  in the Academic year – 2022/2023 (*Google Form Submission*)

Outcome of the Re- Scrutinization of Final Examination Marks & Grades – Academic Year 2021/2022,
Department of Agricultural and Plantation Engineering, Faculty of Engineering Technology.

Outcome of the Re- Scrutinization of Final Examination Marks & Grades – Academic Year 2021/2022 

Instruction to access the FET2023 Faculty Class for Engineering Technology Students: learnousl.ou.ac.lk 

Final Deadlines to Submit Daily Diaries, Reports(Training / Work Experience) and [FET/TRG/07] Forms to be considered for the Convocation and Award Ceremonies 2023

Re-scrutinization of Results of the Final Examination 2021/22- Faculty of Engineering Technology

Students who sat for the Final Examination  2021/2022 for the undergraduate programmes – BTech (Hons), BIS (Hons), BSE (Hons) and ACAT can apply for the re-correction of the results of the final examination. Duly filled application along with proof of payment (Rs.500/ per each course) should be sent on or before 18.05.2023 as per the instructions given in the Notice given below.

Students are also required to submit the same application via Google form given in this link :
https://forms.gle/cxmNc3sSuxaukvAJ9

1. Notice
2. Application Form for Verification of Examination Grades – Academic Year 2021/2022

MEPA Internship

Industrial Training Orientation Programme (NAITA Seminar) via Zoom Technology on 16th March 2023

Dear Students of EfIL 2021/22 programme

[Extended] Application for Empowering for Independent Learning (EfIL) for BTech and BIS programme, Academic Year 2022/2023, Faculty of Engineering Technology, OUSL

The Overall Continuous Assessment marks (OCAM) of the EfIL-2021/22 are attached for your reference. If you have scored more than 80% you are eligible to sit for the Final Assessment. The information about the final assessment will be informed to you in due course. If you have scored less than 80% (you will be considered as resit) and you must follow the EfIL-2022/23 programme and complete. You must complete at least 80% of the quizzes of the 12 modules offered in EfIL 2022/23 programme.  So if you are a resit student who needs to follow the EfIL 2022/23 programme please fill your information on the following  Goole form on or before 24/02/2023, 11.00pm.

https://forms.gle/A548cu3TQpGQspAFA 

The faculty plans to enroll you in the EfiL 2022/23 programme, scheduled for 11th February 2023.  Those who are having the final examination could still fill this form, and follow the EfIL via the LMS.  We will also provide the recorded sessions for you to review and to complete the compulsory assignments.  Further details will be provided as a notice on the faculty web page and via MyOUSL.

Please note that you are requested to register for the FDE3022: EfiL during the re-registration for the Academic Year 2022/2023.

 Pre-Orientation Sessions – Registration 2023/24 – 02

 Pre-Orientation Sessions – Registration 2023/24 – 01

 Pre-Orientation Sessions – Registration 2023/24 – (held on 16th March)

Final Examination Timetable

OUSL Career Fair – 2023 

The Career Guidance Unit of the Open University of Sri Lanka organizes the OUSL Career Fair – 2023 which is opened for all graduates & undergraduates of the OUSL. The OUSL Career fair provides a forum for Students and employers to interact with each other, establish professional relationships, and discuss potential jobs and internship opportunities.

Date: 30th March 2023

Young Inventors Club

Re-scrutinization of Results of the Final Examination BSEHons (BS/BS01) Semester 2 2021/2022– Faculty of Engineering Technology

Students who sat for the Final Examination BSEHons (BS/BS01) Semester 2, 2021/2022 can apply for the re-correction of the results of the final examination on or before 10.01.2023.

1. Notice 

2. Application Form for Verification of Examination Grades – Academic Year 2021/2022

Students are also required to submit the same application via Google form given in this link – https://forms.gle/TCmJ4z8HLQTQ19rFA

Timetable (Draft) of the Final Examination, Academic year, 2021/2022

The Final Examination of the Academic year, 2021/2022 will be conducted from 30th January 2023 till 15th March 2023. The time table(draft) can be downloaded from the link given below. Click here

The pre-counseling session for new registration – Academic Year 2022/23 on 31-12-2022 from 09.00 am to 12.00 am via zoom. Please log on considering the given time according to your selected study program (BTech, BIS & ACAT).  Read more

Required documents to bring for New Registration – Faculty of Engineering Technology – Academic Year 2022/23 Click Here

ZOOM meeting on 21/12/2022 from 9.30 AM to 11.00 AM, only for students who are currently undergoing training

The Examination Division has reviewed all applications requesting for an extra re-sit attempt to sit the final examination 2021-22, due to a Covid-19 related issue.  Please click here to view the decision. 

Internship programme for undergraduates – The Central Bank of Sri Lanka Read more

Dear prospective students,

The online application closing date is extended up to 15th December 2022, for Academic Year 2022/23, BTech, BIS, and ACAT programs in the Faculty of Engineering Technology, OUSL… Read more

Bachelor of Software Engineering Honours Final Exam Timetable-2021/22 Click here

Student Start-up video competition  Read more

311^th YSF Symposium  Read more

Dear Prospective Students,

The “Fourth day of the pre-orientation session” is scheduled for 26^th November 2022 (Saturday) from 9.30 am to 11.30 am via zoom to make you aware of programme offered by the Faculty of Engineering Technology, OUSL. The Zoom links for the session is given below

Topic: Fourth day of pre-Orientation session/ FET
Time: Nov 26, 2022 09:30 AM to  11.30 am

Join Zoom Meeting
https://us02web.zoom.us/j/87273702631?pwd=MmxVcHBYYWxsdElBYXlEMi8xWDNPdz09

Meeting ID: 872 7370 2631
Passcode: 691385

Dear Prospective Students,

The application submission dates for B.Tech, BIS, and ACAT programmes for the academic year 2022/23 have been extended till 30th November 2022. In line with that, the dates for calming Non-approved Exemptions and the New Registration dates are revised as shown in the letter given below.

New scheduled dates for registration- Academic year 2022/23  

AGM 3203 COMMUNICATION SKILLS -Continuous Assessment II (CAT II)

Please note that there will be no written paper (CAT II) for the AGM 3203 course. Read the announcement in the Moodle page for more information.

Call for Research Papers for ERU Gold Medal  – Academic year 2020/2021 Read more….

Note: Kindly attach the completed application form. Click here..

Post orientation session 

Pre- orientation session Day 03 (08-10-2022)

2nd day of the  pre -orientation session (25-09-2022)

Notice:

Those who wish to seek exemptions are recommended to read the “Guidelines for Exemption document” and “Application for getting exemptions for the Academic year 2022/23” Both documents are available on the faculty web.

*  Last date to submit non-approved qualifications for exemption evaluation extended up to December 01, 2022

*  Last date for claiming approved exemptions is May 30, 2023

How to Apply: All exemption requests (PDF version) are needed to send to engreg@ousl.lk and set the subject for the email as “Exemption request for the Academic year 2022/23”. More than that you can send the hard copies of your Exemption request documents to the given address in the application at least one week before the deadline. If any quires, please contact: 0112881285 / 0716368283

1.  Application to get exemptions for the academic year 2022/23
2.  Guideline document to get exemptions

CONTINUOUS ASSESSMENT TEST # 2- 2021/2022  

CONTINUOUS ASSESSMENT TEST # 2- 2021/2022  

Selection of preferred center to sit CAT#2 among Kilinochchi, Polonnaruwa and Ampara study centers

CAT2 Timetable (Revised) – Academic Year 2021-22

Zoom links for the pre-orientation sessions (14 & 25 Sep, 2022 and 08 Oct 2022) -Faculty of Engineering Technology, OUSL – Academic Year 2022/23 Click here

Internship programme for undergraduates – Central Bank of Sri Lanka.  Read more….

[Deadline extended] Re-scrutinization of Results of the Final Examination BSEHons (BS01) Semester 1 2021/2022– Faculty of Engineering Technology

The drop dates for the following programmes will be on 29^th and 30^th July 2022.

Re-scrutinization of Results of the Final Examination BSEHons (BS01) Semester 1 2021/2022– Faculty of Engineering Technology

Students who sat for the Final Examination BSEHons (BS01) Semester 1 2021/2022 can apply for the re-correction of the results of the final examination on or before 01.08.2022.

Students are also required to submit the same application via google form given in this link –
https://forms.gle/4iLJg2roQe6zqTZi7

1. Notice

2. Application Form for Verification of Examination Grades – Academic Year 2020/2021  

Industrial Training Orientation Programme (NAITA Seminar)
via Zoom Technology on 27th July 2022 @ 9.30 am  

CAT01 – Academic Year 2021-22 – General Instructions 

CAT1 – Academic Year 2021-22

Applications for the Manamperi Award (Engineering) – 2022

Important Notice to students who have registered for Industrial Training Modules in view of applying for Training /Training Releasement in the Academic year – 2021/2022 

Dear Students,

RE-REGISTRATION- 2021/22 – FACULTY OF ENGINEERING TECHNOLOGY

Submission of evidences for not utilising the final examination attempt for the academic year 2020/2021 due to COVID-19 related issues 

Deadline extended – Re-scrutinization of Results of the Final Examination 2020/21 – Faculty of Engineering Technology

Dear Students

scan0039

Re-scrutinization of Results of the Final Examination 2020/21 – Faculty of Engineering Technology

Students who sat for the Final Examination  2020/2021 for the undergraduate programmes – BTech (Hons), BIS (Hons), BSE (Hons) and Advanced Certificate in Apparel Technology can apply for the re-correction of the results of the final examination on or before 13.05.2022.

Students are also required to submit the same application via google form given in this link – Click here

1. Notice

2. Application Form for Verification of Examination Grades – Academic Year 2020/2021

Newly registered students for the academic year 21/22, can access the following course online. You can download the softcopies of the course material until you get the printed course material.

There will be pre counselling sessions for reregistering students on 22.04.2022. Please see below information.

Re-registering  students who wish to seek special concessions to complete the Bachelor of Technology Honours in Engineering and Bachelor of Industrial Studies Honours programmes of study, during the academic year 2021-22, under the Interim Curriculum, please fill the academic counselling form.

Guide for Re-registering Students – Academic Year 2021/22

Final Deadlines to Submit Daily Diaries, Reports(Training / Work Experience) and [FET/TRG/07] Forms to be considered for the Convocation and Award Ceremonies 2022    

Key Important Dates for applicants/ students who wish to enroll in the following programmes of study:

Bachelor of Technology Honours in Engineering
Bachelor of Industrial Studies Honours
Advanced Certificate in Apparel Technology

Re-opening of the online application process for new applicants – from 2nd  to 4th April 2022
Re-registration of all students  – from 26th to 28th April 2022
The tentative date of commencement of academic activities – 30th  April 2022
Add/drop dates – 2nd, 3rd, 4th June 2022 

Any revision to the above mentioned dates will be published on the Faculty of Engineering Technology web page.
Kindly note that the online registration portal and the faculty web page at www.ou.ac.lk may not be accessible during prolonged power interruptions.

Pre orientation session for the prospective students will be held on 20.03.2022 from 0930 hrs onwards.

Dean’s scholarship list 2019                          Dean’s list 2019 

Last date for submitting the application for qualification evaluation to receive exemptions is on 15.03.2022. Strictly no applications will be entertained after this date.

Industrial Training Orientation Programme (NAITA Seminar) via Zoom Technology
on 02nd March 2022 @ 2.00 pm 

Additional Information to the Counsellors for Registering New Students – Academic Year 2021/22.

Academic Counselling sessions for the Newly Registering Student will be held on the following Days. You are welcome to join us.

Final Examinations – Phase III -2020/2021

Final Examination – Phase III Time Table 

The Final Examination – Phase 2 and 3 (2020/2021 Academic year) will be conducted from 18th January to 25th February 2022. The  finalized updated  time tables can be downloaded from the link given below

Final Examination – Phase 3 Time Table                                Final Examination – Phase 2 Time Table

Technical Assistant (on Contract) / Industrial Liaison Center 

The time period for online registration of the Phase 2 and 3 of the Final Examination 2020/2021 has been extended as follow,

Faculty of Engineering Technology Student Academic Conference (FETSAC)-2021

                       https://learn.zoom.us/j/66013981571?pwd=WVIyUXZQbzlQSnErbGZFdnY4YmNkQT09

Workshop on the topic ‘Preparing Undergraduates for Industry’ via Zoom Technology on 17h December 2021

An awareness session on the registration related matters for the Advanced Certificate in Apparel Technology program conducted by the Department of Textile and Apparel Technology is scheduled on 19th December 2021 from 10.00 am onwards. All the new students in the Advanced Certificate in Apparel Technology program (only Academic year 2021/2022) should login to the session using the following zoom link.

Online registration for the Final Examination phase 1 (to be started on 15^th December) of the Faculty of Engineering Technology – 2020/2021 academic year, will be reopened from 7^th December to 11^th December 2021 for students who have not registered

EfIL schedule for students enrolled in the BIS, BTech and BSE programmes 2021-22

For further information please log on to https://cites.openlearn.lk – EMPOWERING FOR INDEPENDENT LEARNING (EfIL) – 2021/22

The Final Examination – Phase 1 will be conducted during the period 15.12.2021 to 16.01.2022. The Finalized time table can be downloaded from the link given below. 

Important Notice –

Only applicable for students who responded to the Google Form published on the web site (dated 25-09-2021) & informing final deadlines to submit daily diaries & training reports

Important Notice to students

Final deadline for submitting the Google form to obtain the eligibility & requirement for re-registering for training modules if the training module is not completed within two academic years from registration 

Important Notice to students

 Industrial training Learning Management System (LMS) login credentials 

Important Notice to Students  

A Google form is available here and should be filled and submitted only by students who have got one or two incomplete (Hasn’t obtained final result yet) industrial training modules even if the student has successfully completed undergoing the training 

1^st Awareness Seminar on Study Programmes
12.08.2021

2^nd Awareness Seminar on Study Programmes
14.08.2021

3^rd Awareness Seminar on Study Programmes
02.09.2021

………………………………………………………………………………………………………………………..Updated 12.07.2021

Final Award Lists of Engineering Faculty 

………………………………………………………………………………………………………………………..Updated 06.07.2021

Revised Notice on Industrial Training Orientation Programme (NAITA Seminar) via Zoom Technology on 08-07-2021 

………………………………………………………………………………………………………………………..Updated 05.07.2021

Industrial Training Orientation Programme (NAITA Seminar) via Zoom Technology on 08th July 2021 @ 9.00 am

………………………………………………………………………………………………………………………..Updated 08.05.2021

Notice for the Students

Last date for dropping courses for the Academic Year 2020/21

You are requested to inform the nearest Regional Centre using your OUSL Email the course(s) you may wish to drop on or before the dropping deadline 22nd May 2021 with following details.

• Name
• Registration Number
• Course Code(s) to be Dropped
• Contact Number

Your request should be sent to one of the following Email address.

You will be assigned a Repeat grade if you do not drop a course, and not complete the CA for that course.

————————————————————————————————————————————————————————————-

Activity Diary 2020/2021

…………………………………………………………………………………………………………Updated 03.05.2021 @7.00pm

Important Notice to students who have registered for Industrial Training Modules in view of applying for Training /Training Releasement in the Academic year – 2020/2021

…………………………………………………………………………………………………………Updated 09.04.2021 @11.45pm

Google Form for Applications for Consideration for the Award of the Higher Diploma in Technology / Higher Diploma in Software Engineering / Higher Diploma in Industrial Studies

……………………………………………………………………………………………………………………………………………………….

Applications for Consideration for the Award of the Higher Diploma in Technology / Higher Diploma in Software Engineering / Higher Diploma in Industrial Studies – Academic year 2019/20

• Faculty of Engineering Technology entertains applications from the students those who have fulfilled all the necessary requirements for consideration for the award of the Higher Diploma in Technology / Higher Diploma in Software Engineering / Higher Diploma in Industrial Studies to be awarded for the academic year 2019/20.
• The relevant Google Form will be available to be filled and submitted from 08^th April 2021 to 22^nd April 2021.
• Students who submit the Google Forms on or before 22^nd April 2021 will only be considered for the award of the respective Higher Diploma in the academic year 2019/20.

Assistant Registrar
Faculty of Engineering Technology

———————————————————————————————————————————————————————-Updated 05.04.2021 @04.15pm

SPECIAL NOTICE

Register for Training modules to request Releasement from
Industrial Training in lieu of working experience – 2020/2021  

———————————————————————————————————————————————————————-Updated 05.03.2021 @11.40am

SPECIAL NOTICE

Scrutinisation of results of Final Examinations – 2019/2020 (Phase 2 Stage B)  

Google Form   

———————————————————————————————————————————————————————-Updated 16.02.2021 @09.00pm

ADDITIONAL Industrial Training Orientation Programme (NAITA Seminar) via Zoom Technology on 18th February 2021@9.00am   

———————————————————————————————————————————————————————-Updated 04.02.2021 @ 9.30pm

Application form for Applying for ERU Gold Medal 2019/2020  

                 Calling for Applications for ERU Gold Medal 2019/2020   

———————————————————————————————————————————————————————-Updated 26.01.2021 @2.00pm

Google Form for Scrutinisation of Results of Final Examination – 2019/2020

SPECIAL NOTICE

Dear Students,

Those who wish to apply for Scrutinisation of results of Final Examinations of the Study Programmes offered by the Faculty of Engineering Technology, Academic Year 2019/2020 have to:

• Fill the Google form which appears in the Faculty webpage, by 07^th February
• Pay Scrutinization fee to the OUSL Account No 174-1002-8-0347378 – Peoples Bank, Nugegoda. (Rs. 500/= per one Course).
• Upload the scanned copy of payment slip through the same Google form.

(Please note that the late/incorrect/incomplete applications will not be accepted)

Assistant Registrar
Faculty of Engineering Technology
20^th January 2021

———————————————————————————————————————————————————————-Updated 22.01.2021 @ 8.30pm

Final Deadline to Submit Training Diaries and Reports(Training / Work Experience) to be considered for the Convocation and Award Ceremonies 2021  

———————————————————————————————————————————————————————-Updated 12.01.2021 @3.00pm

Rescheduled Final Examinations Timetable Academic Year 2019/2020 – Phase 2 

———————————————————————————————————————————————————————-Updated 07.01.2021 @8.00pm

Special Notice  

Final Examination 2019-2020- Phase 2 Stage B  (Remaining Final Examinations)

1.  As the Final Examination Phase 2 -Stage B will be held from 15^thJanuary, you are expected to fill the relevant Google Form if you wish to change your regular centre, even if you have filled the Google Form before the start of Phase 2-Stage A (in September 2020).
2. You are informed that for all courses of old curriculum (eligibility gained in 2016/2017) and CA completion for some courses of interim curriculum (eligibility gained in 2017/2018), the eligibility /CA completion will lapse after the conclusion of Final Examination Phase 2 -Stage B. Kindly note that in that event you may have to register for corresponding course(s) during the Add-Drop 2020/2021 which will be conducted after release of marks of the Final Examination Phase 2 -Stage B.

The earlier decision to extend eligibility/CA will not be applicable now as the Examinations of Phase 2 -Stage B will be held, and the result will be available prior to the Add-Drop Period.

Dean/ Faculty of Engineering Technology 

———————————————————————————————————————————————————————-Updated 01.01.2021 @4.50pm

———————————————————————————————————————————————————————-Updated 30.12.2020 @ 9.30pm

Industrial Training Orientation Programme (NAITA Seminar) via Zoom Technology on 30th December 2020 @ 9.00 am   

Commencement of Academic Activities for Academic Year 2020/2021

———————————————————————————————————————————————————————-Updated 24.11.2020 @ 3.30pm

Webinar on the topic ‘Industrial Training and Adherence to Company Procedures’ via Zoom Technology on 30th November 2020   

———————————————————————————————————————————————————————-Updated 08.11.2020 @ 4.00pm

Webinar on the topic Industrial Training : An Essential Learning Experience for Future Engineers via Zoom Technology   

———————————————————————————————————————————————————————-Updated 29.10.2020 @ 8.00pm

Postponement of Diary and Report (Training / Work Experience) Submissions to be considered for the Convocation and Award Ceremonies 2021 due to Second Stage of CoViD-19 Outbreak  

———————————————————————————————————————————————————————-Updated 19.10.2020 @ 8.30am

Alternate Method to Submit Documents to fulfil Industrial Training Requirement for the award of [Degree / HD]-2021 amidst 2nd Stage of CoViD-19 Outbreak  

———————————————————————————————————————————————————————-Updated 15.10.2020 @ 12.20pm

Very Important Notice from Training Engineer/FET – Extra Registration Session at all RCs except CRC on 21-10-2020 to register for Industrial Training Courses Only for Academic Year 2019/2020  

———————————————————————————————————————————————————————-Updated 09.10.2020 @12.15pm

Changes made for the Activity Schedule from 10th October to 18th October 2020  

———————————————————————————————————————————————————————-Updated 08.10.2020 @12.45pm

Very Important Notice from Dean/FET – Special Registration Session on 19-10-2020 to register for Industrial Training Courses Only for Academic Year 2019/2020     

——————————————————————————————————————————————————————————————Updated 25.09.2020

FDE3020 – Empowering for Independent Learning    

——————————————————————————————————————————————————————————————Updated 17.09.2020

17^th September 2020.

Dear Student,

Commencement of Academic Activities(2020/2021) for Selected Courses for Newly Registered Students – Faculty of Engineering Technology

The Faculty plansto commence the academic activities of the courses presented in the table below from 20^th September 2020.

The Activity Schedule for these courses is on the Faculty Web Page.

The English course on ‘English for General Academic Purposes’ (EGAP) is to commence from 27^th September 2020 (Sunday).

The Activity ‘Empowering for Independent Learning’ (EfiL) for the students registered at Colombo Regional Centre will be conducted on the following days: 3^rd,7^th, 9^th and 10^th of October 2020. The dates on which EfIL is conducted at other centers will be notified by the Academic Career Guidance Unit via MyOUSL.

Wish you all the best with your studies and a successful academic career with the Faculty of Engineering Technology.

Dean / Faculty of Engineering Technology

——————————————————————————————————————————————————————————————Updated 11.09.2020

  Final Examination 2019-2020 – Phase 2 – Revised Time Table  Click here…..   

——————————————————————————————————————————————————————————————Updated 03.09.2020

Dear Student,

Final Examination 2019-2020- Phase 2 – Faculty of Engineering Technology – Alternative Examination Centre

As things stand today, the University can provide accommodation at the TRF to the students who sit the above Examination at the Main Campus as it did before the Covid 19 situation. However, the Faculty will continue to provide the following additional facilities as it did for the Final Examination 2019-2020- Phase 1:

i) The  Final Examination of all courses will be conducted at the all Regional Centers, and additionally at Study Centers at Gampaha, Kalutara and Ambalangoda.

ii) A student who has a difficulty to sit the Examination at the regular (usual) centre is allowed to sit at an alternative centre selected out of the above 12 regional/study centres. However, in order to provide this facility the student has to complete a Google Form designed to get the required information in order for the Faculty to plan distribution of Question papers. Please be informed that this facility will only be given to those students who complete this Google Form correctly before 12 noon 9th September.  The link to the Google Form is given below:

http://bit.ly/fephase2

Fill this Google Form only if you expect to change the  regular (usual) examination centre by 12 noon 9th September.

Dean/ Faculty of Engineering Technology

Third term activity schedule 2020/2021 from 02-08-2021 to 24-10-2021

—————————————————————————————————————————————————————————————–Updated 21.08.2020

Very Important Notice from Training Engineer – Deadlines to submit FET/TRG/07 Forms, Training or Work Experience Reports to be considered for 2021(I) Convocation and Award Ceremonies  More details….. 

—————————————————————————————————————————————————————————————– Updated 21.08.2020

Important Notice from Training Engineer – Amnesty Period to Submit delayed Training Reports & Daily Diaries for training commenced after 01-Jan-2019   More details….. 

—————————————————————————————————————————————————————————————– Updated 18.08.2020

Online Application- Faculty of Engineering Technology-Final Examination 2019/2020 Phase 2

Please submit your online application for the Final Examination 2019/2020- Phase 2
through MyOUSL from 18-08-2020 to 31-08-2020, if you have not already done so. This Final Examination will be conducted from 26.09.2020 to 21.10.2020.

——————————————————————————————————————————————————————————————————————————————

Implementation of Revised Curriculum of Advanced Certificate in Industrial Studies Programme

Click here to download Implementation of Revised Curriculum of Advanced Certificate in Industrial Studies Programme

——————————————————————————————————————————————————————————————————————————————

Time schedule of Discontinuation of the Interim Curriculum and Implementation of the Revised Cur. [2019-01-30 22:36:57]

Time schedule of Discontinuation of the Interim Curriculum and Implementation of the Revised Curriculum of Bachelor of Industrial Studies Honours Degree Programme

Click here to download Time schedule of Discontinuation of the Interim Curriculum and Implementation of the Revised Curriculum of Bachelor of Industrial Studies Honours Degree Programme

——————————————————————————————————————————————————————————————————————————————

………………………………………………………………………………………………………………………..Updated 26.06.2021

Details of implementation of Revised Curriculum- Bachelor of Technology Honors in Engineering [2019-01-09 22:13:14]

For More Infomation, Click below link to download complete document

Click here to download Details of the implementation of Revised Curriculum- Bachelor of Technology Honors in Engineering

The Course Selection Guide for the New Student 2020/2021  Read more…..

…………………………………………………………………………………………………………………………………………………….